superwhite90
19th March 2014, 02:08 PM
This has been off the car for about 2 years now, as I'm running with a Janspeed system
I bought it about 4 years ago from Chris or known as 'Oukie' on IMOC.
I had been using it even with a blowing flexi pipe but then switched to the Janspeed.
I've had the flexi cut off and a new one welded into position. I will get a picture of the welding for you tonight. The downpipe itself had some pretty crap repairs done to it by my previous employment, so I had all that cut out and lace welded again so its as strong as it was when it was new - pictures of that later as well.
Below are photos of it when I first got it and it on the car.
http://www.mr2mk1club.com/images/imported/2014/03/100_0033-1.jpg (http://s72.photobucket.com/user/superredmr2/media/100_0033.jpg.html)
http://www.mr2mk1club.com/images/imported/2014/03/100_0034-1.jpg (http://s72.photobucket.com/user/superredmr2/media/100_0034.jpg.html)
http://www.mr2mk1club.com/images/imported/2014/03/100_0035-1.jpg (http://s72.photobucket.com/user/superredmr2/media/100_0035.jpg.html)
http://www.mr2mk1club.com/images/imported/2014/03/100_0049-1.jpg (http://s72.photobucket.com/user/superredmr2/media/100_0049.jpg.html)
http://www.mr2mk1club.com/images/imported/2014/03/Picture0012-1.jpg (http://s72.photobucket.com/user/superredmr2/media/Picture001-2.jpg.html)
The exhaust tips need a bloody good polish and there are some marks of the huge outlets due to rubbing on my bodywork at the time. These won't be noticable as much when it is fitted.
Please note, this exhaust is VERY LOUD, louder than a standard Janspeed (I've had exhaust wadding added to my back box!!) and will probably not allow you to use on Track.
It is noticably heavier than my Janspeed, due to the sheer size of the pipework going to the tips, DN65 approx and the exhaust hangers are square, which makes it a bit tricky to install with one person, unless you use other bodily parts to support it or a jack if you are lazy ;) WD40 in the hanger rubbers make life easier!
I will get square hangers cut off and replaced with 12mm round bar if anyone is seriously interested?
£200 ONO
Cheers
I bought it about 4 years ago from Chris or known as 'Oukie' on IMOC.
I had been using it even with a blowing flexi pipe but then switched to the Janspeed.
I've had the flexi cut off and a new one welded into position. I will get a picture of the welding for you tonight. The downpipe itself had some pretty crap repairs done to it by my previous employment, so I had all that cut out and lace welded again so its as strong as it was when it was new - pictures of that later as well.
Below are photos of it when I first got it and it on the car.
http://www.mr2mk1club.com/images/imported/2014/03/100_0033-1.jpg (http://s72.photobucket.com/user/superredmr2/media/100_0033.jpg.html)
http://www.mr2mk1club.com/images/imported/2014/03/100_0034-1.jpg (http://s72.photobucket.com/user/superredmr2/media/100_0034.jpg.html)
http://www.mr2mk1club.com/images/imported/2014/03/100_0035-1.jpg (http://s72.photobucket.com/user/superredmr2/media/100_0035.jpg.html)
http://www.mr2mk1club.com/images/imported/2014/03/100_0049-1.jpg (http://s72.photobucket.com/user/superredmr2/media/100_0049.jpg.html)
http://www.mr2mk1club.com/images/imported/2014/03/Picture0012-1.jpg (http://s72.photobucket.com/user/superredmr2/media/Picture001-2.jpg.html)
The exhaust tips need a bloody good polish and there are some marks of the huge outlets due to rubbing on my bodywork at the time. These won't be noticable as much when it is fitted.
Please note, this exhaust is VERY LOUD, louder than a standard Janspeed (I've had exhaust wadding added to my back box!!) and will probably not allow you to use on Track.
It is noticably heavier than my Janspeed, due to the sheer size of the pipework going to the tips, DN65 approx and the exhaust hangers are square, which makes it a bit tricky to install with one person, unless you use other bodily parts to support it or a jack if you are lazy ;) WD40 in the hanger rubbers make life easier!
I will get square hangers cut off and replaced with 12mm round bar if anyone is seriously interested?
£200 ONO
Cheers