View Full Version : mr2 breaking for spares (not anymore)
LiamMcN94
24th July 2014, 07:30 PM
Breaking my 1989 mr2 due to never getting it running right and losing interest. All parts available and willing to post most parts. It has a full janspeed exhaust system
BigBobo
25th July 2014, 11:58 AM
I'm interested in the ignition coil if it passes the test shown in the BGB (I already have three failed ones). Primary coil resistance between 0.5 and 0.7 ohm (measure between the negative and positive terminal) and secondary coil resistance between 11000 and 16000 ohm (measure between big central and positive terminal).
I'm also looking for an undamaged triangle trim bit that covers the side mirrors mounting screws. Passenger side
jimi
25th July 2014, 02:36 PM
Primary coil resistance between 0.5 and 0.7 ohm
You'll need a good quality meter and leads to measure that kind of resistance accurately ;)
BigBobo
26th July 2014, 01:24 PM
You'll need a good quality meter and leads to measure that kind of resistance accurately ;)
Didn't know that, might be why I have three "failed" coils already :s.
I also need all the switches in the drivers door, to open the windows, lock the car etc.
jimi
26th July 2014, 03:01 PM
Put your meter on resistance, join the leads together and see what it reads. The cheaper meters can read 0.2/0.3 (or higher) ohms. even a good quality meter is liable to read 0.1 ohms. So if your failed coils are failing on the primary resistance and are (for example ) around 0.5/1 ohm out of spec they may well be OK. It might just be that the meter/leads combination is making them read out of spec.
Caboose457
26th July 2014, 09:10 PM
I am looking for a strut rod and bushings for the right rear passenger side if you are willing to part ways with it
paulmannion
27th July 2014, 08:51 PM
I need one of the plastic caps for over the rear suspension mount if you've got one spare?
sunsetjoe
27th July 2014, 08:52 PM
Screen wash bottle?
smaxer
28th July 2014, 03:17 PM
front bumper bar?
sTuArT
28th July 2014, 03:28 PM
front bumper bar?
Fensport had some a while back :-)
smaxer
28th July 2014, 03:35 PM
Thanks, will sent him a message.
Davyt1301
2nd August 2014, 06:49 AM
How much are you looking for your exhaust?? And would you post to Northern Ireland? Cheers.
LiamMcN94
6th August 2014, 06:11 PM
Sorry just got all these messages. I've managed to get the car running so I won't be breaking it now
Station
8th August 2014, 08:54 AM
Rear brake calipers and handbrake cable!
Station
11th August 2014, 06:41 AM
Fensport have none in - are you sure Toyota don't stock these, I bought a brand new one from them a few years ago.
MarkCL
11th August 2014, 10:34 AM
Rear brake calipers and handbrake cable!
I've seen both of these for sale on eBay - handbrake cable http://www.ebay.co.uk/itm/TOYOTA-MR2-MK1-AW11-REAR-HANDBRAKE-CABLE-NEW-x-1-/270424210046?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3ef689fa7e - just first of a list available, and caliper - http://www.ebay.co.uk/itm/TOYOTA-MR2-MK1-Left-or-right-rear-brake-caliper-handbrake-e-brake-SPARES-/121398999329?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AMR+2%7CPlat_Gen%3AMK+I&hash=item1c43f1b921 - there are others listed too and you could always contact the breakers directly to see what's available :)
Cheers,
Mark
zab28
11th August 2014, 05:43 PM
Is the radiator any good?
Vistalite
11th August 2014, 05:48 PM
Oh for goodness sake! Liam, can't you mod the title of this thread advising it's no longer going to be broken? Please?
tommundy
11th August 2014, 06:58 PM
I've done it for him.
Cheers,
Tom
LiamMcN94
14th August 2014, 11:14 AM
If I can figure out how to do it ill take this down. Sorry for any inconvenience
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.