Breaking red t bar

[mk1 dal]

hi all after inspection car today its no good as a project its F%%ked but there is a few good parts worth going on other cars . The engine turns over fine but wont start due to old fuel i will try and get it going . The crash bar looks very good but not got it of yet , 1A steering wheel , un broken ash tray , and the c piller trim with no broken nuts .These parts will be cheap

[cchrysos]

Hi Gary.
How much for the c pillar trim please.

Thanks

Chrys

[mk1 dal]

I will let you know tomorrow mate after i cleaned them but you get first refusal . i know how much there are fetching but to you i do them for £30 the set + postage .

[cchrysos]

Thanks mate. Can I check mine on Monday and let you know please. I am pretty sure some of my nuts are damaged...ooo err

[MylesHSG]

What colour is the interior?

[mk1 dal]

black but the leather seat are buggered .

[AW11mike]

How much for a drivers side door card mate?

[mk1 dal]

That's no good mate but i might have one i will check . you want a leather one .

[mk1 dal]

Give the wheel a clean and its pretty much mint

http://www.mr2mk1club.com/images/imported/2016/04/IMAG1282_zpsmwgf1ifa-1.jpg (http://s1060.photobucket.com/user/Gary_Mellor/media/mr2/IMAG1282_zpsmwgf1ifa.jpg.html)

[AW11mike]

That's no good mate but i might have one i will check . you want a leather one . yes please mate.

[smaxer]

How much for the rear brake calipers and n/s side skirt?

[sTuArT]

Can I buy The ash tray if it's for mk1b and Black.

[mk1 dal]

Crash bar is solid it has light surface rust but a wire brush and a paint will sort it . Its been tested for strength as the lad pulled in on to the low loader using the crash bar with all for wheels locked solid ( seized wheel bearings ) :rolleyes:

ps i will get back to lads showing interest in parts

[paulandchez]

Hi Gary

Does it have black leather surround for the radio etc? If yes and it has no tears, I'll have it :-)

[mk1 dal]

Hi Gary

Does it have black leather surround for the radio etc? If yes and it has no tears, I'll have it :-)

I have 3 off them mate all in good condition .

[mk1 dal]

Ash tray sold

[mk1 dal]

The crash bar i will take £60 . there are 3 broken bolts what need drilling and tapping out .

[paulandchez]

I'll have one. Let me know how much and I'll sort you out. Are the lugs good too or snapped like ours? :-D

[Marcustownend]

Is the passenger wing ok and if so how much

[kevs aw11]

pm sent gary
thanks kev

[mk1 dal]

The crash bar has now been repaired and painted .

http://www.mr2mk1club.com/images/imported/2016/04/IMAG1290_zpsipyr8elh-1.jpg (http://s1060.photobucket.com/user/Gary_Mellor/media/mr2/IMAG1290_zpsipyr8elh.jpg.html)

[mk1 dal]

Is the passenger wing ok and if so how much
Sorry it has rust on the arch lip only any good for a wide arch conversion .

[paulsims2001]

how much Gary will pay good money

[paulmannion]

Gary, if it driver's door pin hasn't sunk then I'll take that? And the passenger door seal for the bottom of the door if it's not split? Many thanks,

[mk1 dal]

bar sold , engine sold , wheel sold , trims sold

[superwhite90]

hi Gary, the next set of c-pillars you come across can I have first dibs please :)

[Station]

Those wheels go for around £150 on eBay!

Are the rear caliper said ok? I'm after a complete exhaust system if it's in good condition?

Can you also post photo of seats?

[mk1 dal]

The seats are ripped and need recovering , The rear callipers are like new so there going on my own car but i do have a decent set . the exhaust system is a S/S jan speed this is now fitted to my car with a new flexi welded in . My old system is in good nick with the middle box cut out and replaced with a stainless steel tube .

[mk1 dal]

This cars only in the garage till Tuesday then it goes for scrap so if you need bits be quick

[cchrysos]

does it have rear speakers and the mouldings? i am thinking of adding some to my mk1a

[mk1 dal]

I do have a set of another car mate .

[cchrysos]

I assume they are a straight swap arent they?
Let me know what you want for them please Gary.

Cheers

[mk1 dal]

There are 4 t bar caps which have slight cracks in them witch i car repair and 4 t bar hard covers in very good nick , the t bar bags have been eaten by mice sadly . The A and B posts are very good and could be cut out .its a shame to break the car but after been stood for 7 years out side its killed it the floor and body is dust and totally beyond saving .

[mk1 dal]

I assume they are a straight swap arent they?
Let me know what you want for them please Gary.

Cheers
i have no idea mate never tried the swap , you might need the loom to power the speakers .

[paulandchez]

Gary....I've pm'd and text you mate

[Vistalite]

Morning Gary, good A & B posts? Are the A posts good all the way up, including where the bonnet brackets at the top?

I d be interested in those please. Could you send pics at all?

[mk1 dal]

Radio surrounds in very good condition but will need 6 mm washers fitting on top fixing holes , the bottem lugs are fine . there are 2 1b and 1 1a . £20 pound each + postage . I also have a set of A post inner trim covers in mint condition for t bar only ( very rare to get these of with out breaking them ) £30 + postage for the set .

http://www.mr2mk1club.com/images/imported/2016/05/IMAG1294_zpso95omknu-1.jpg (http://s1060.photobucket.com/user/Gary_Mellor/media/mr2/IMAG1294_zpso95omknu.jpg.html)

http://www.mr2mk1club.com/images/imported/2016/05/IMAG1296_zpslo4803ri-1.jpg (http://s1060.photobucket.com/user/Gary_Mellor/media/mr2/IMAG1296_zpslo4803ri.jpg.html)

[Little Lofty]

Ill take one for a 1b please, mines been cut at some point, cheers.

[mk1 dal]

Morning Gary, good A & B posts? Are the A posts good all the way up, including where the bonnet brackets at the top?

I d be interested in those please. Could you send pics at all?

I've had a proper look today and they aren't perfect bar the drivers side b post this is ,the others have a little corrosion but are still very usable and far superior than what's on your car at the moment . i will get some pics tomorrow when it stop bloody raining .

[cchrysos]

Is the suspension on a MK1b the same as a MK1a? I want to do a suspension rebuild and it would be easier if i could do it off the car then bolt it on afterwards.

[mk1 dal]

No mate , the strut legs are different lengths .

[cchrysos]

ok thanks

[Johnso]

I want to do a suspension rebuild and it would be easier if i could do it off the car then bolt it on afterwards.

I was thinking the same, as I could paint up and poly bush off the car but I guess it would be a big job to get all the suspension off and I cannot help tomorrow. Is there a quick way to get it off?

[mk1 dal]

The suspension on this car is shot to hell its not worth taking off , to get the engine out i had to cut through the drive shafts as both rear wheel bearing had seized solid i have never seen anything like it .

[sTuArT]

3621

Collected today from the post office. Thanks very much :-)