Mk1 MR2 Track day /Race car harness & brackets.

[neiljones308]

http://www.mr2mk1club.com/images/imported/2011/04/morefarmersweekly002-1.jpg
This is a Willans 4 point full harness, complete with bracket to hold it behind drivers seat. It also has the eyes to hold the standard seat belt on, so you can either use the harness, or original seat belt.

http://www.mr2mk1club.com/images/imported/2011/04/morefarmersweekly003-1.jpg
The bracket behind the seat is very neat, and is held on with 3 large bolts into the engine bay. http://www.mr2mk1club.com/images/imported/2011/04/morefarmersweekly005-1.jpg
I can also supply the rear carpet (with the hole in, so you can keep yours hole free) for £10 plus £5 P&P.
http://www.mr2mk1club.com/images/imported/2011/04/morefarmersweekly004-1.jpg
I want £90 for the harness, rear bracket, and eyes. PLus £5 for P&P. If it doesn't sell in 1 week, then please make an offer.

[neiljones308]

Sorry, it is a 3 point harness., wrote it without thinking :crazy:

[mr2mk1chick]

you need to use a spreader plate with that bracket, as the washers will pull through the fire wall too easy in a crash!
edit: sorry but it also looks wrong for a mk1, as the shoulder adjuster buckle looks too short and would end up sitting on your collar bone and not lower on your chest, which could break your collar bone. there is no room for adjustment.

[neiljones308]

I understand what you mean. Maybe it could have a plate across the back where the nuts hold it on. But they do have large nuts (17mm i think) and very big washers and i don't think they would pull through at all.